Last Updated On 11/15/2008

As of June 6th 2008, MohdParts.com is NO Longer selling Greddy parts, it will turn into an informational site only,
WE STRONGLY RECOMMEND YOU TO PURCHASE ALL YOUR e-MANAGE & GReddy PARTS FROM OUR TRUSTED PARTNER,
 Website: www.AddictiveRacing.com
E-mail: AddictiveRacing@Mac.Com

 

VマネージロゴVマネージVマネージロゴ
     

 

e-Manage Utimate; ?>Trust - Greddy - GReddy V-Manage

GReddy - Mitsubishi EVO9 V-manage Plug & Play Kit!
 ( Variable Valve Controller)

 BUY IT AT,

No Pic

GReddy - Subaru STi V-manage Plug & Play Kit!
( Variable Valve Controller)

 BUY IT AT,

No Pic

GReddy - Acura RSX Type-S V-manage Plug & Play Kit!
( Variable Valve Controller)

 BUY IT AT,

 

 GReddy - E-manage Ultimate! ver.E (Click Here for E-manage Ultimate Versions History)

 - E-manage Ultimate version.E,

 BUY IT @,

GReddy - Mazda RX-8 E-manage Ultimate Upgrade Kit!

 - Mazda RX-8 E-manage Ultimate Upgrade Kit,

  • GReddy Part Number #11940012 99900084UP
  • If you already own the GReddy RX-8 turbo kit that came with the e-manage blue, this new kit will upgrade your setup to the ultimate e-manage.
  • This Kit include some parts that you ca not purchase separately, here is a full list of all included parts,
  1. E-manage Ultimate
  2. E-manage Ultimate ignition adaptor (installed inside the unit, see picture )
  3. Extension Harness with all e-manage ultimate wiring harness
  4. O2 adaptor installed in the extension harness
  5. Orifice hose fitting
  6. intake manifold blocking plate
  

GReddy - E-manage Ultimate Harness Kit (1.2 meter)

 - E-manage Ultimate Harness Kit 1.2m,

  • GReddy Part Number #15901500
  • Includes 3 Harness,
  • 14-PIN harness, Totally New harness specifically for the new features on the e-manage ultimate.
  • 18-PIN harness, Also called the Main harness in the blue e-manage which contains the Main wires & injector wires.
  • 12-PIN harness, Also called the ignition harness in the blue e-manage.
  • This harness is necessary if you have Never installed the e-manage blue before, it contains All the wires needed to fully install the e-manage Ultimate and gets its full potential.
 BUY IT @,

GReddy - E-manage Ultimate Harness Kit (2.5 meter)

 - E-manage Ultimate Harness Kit 2.5m,

  • GReddy Part Number #15901503
  • Includes 3 Harness,
  • 14-PIN harness, Totally New harness specifically for the new features on the e-manage ultimate.
  • 18-PIN harness, Also called the Main harness in the blue e-manage which contains the Main wires & injector wires.
  • 12-PIN harness, Also called the ignition harness in the blue e-manage.
  • This harness is necessary if you have Never installed the e-manage blue before, it contains All the wires needed to fully install the e-manage Ultimate and gets its full potential.
  • If you need a longer cable then the above 1.2meter, use this harness, its 2.5 meter long!
 BUY IT @,

GReddy - E-manage Ultimate Supplement Harness (1.2 meter)

 - E-manage Ultimate Supplement Harness 1.2m,

  • GReddy Part Number #15901501
  • Harness Containing 14-PINS
  • This Harness is for existing E-manage Blue Owners that want to upgrade to the e-manage ultimate, if that's that case, you already own 18-PIN & 12-PIN Harness, all you need is this 14-PIN harness to take full advantage of your e-manage ultimate.
 BUY IT @,

GReddy - E-manage Ultimate Supplement Harness (2.5 meter)

 - E-manage Ultimate Supplement Harness 2.5m,

  • GReddy Part Number #15901502
  • Harness Containing 14-PINS
  • This Harness is for existing E-manage Blue Owners that want to upgrade to the e-manage ultimate, if that's that case, you already own 18-PIN & 12-PIN Harness, all you need is this 14-PIN harness to take full advantage of your e-manage ultimate.
 BUY IT @,
 E-manage Ultimate Optional Parts:

  • E-manage Ultimate Air/Fuel input Harness #15900912
  • This harness is used to feed the air/fuel signal from your wideband brain to the e-manage ultimate.
  • Manual (PDF)
 BUY IT @,

  • E-manage Ultimate Air/Fuel input Harness "SUBSTITUTE" - #15900543
  • You will need to modify this harness to use it as an A/F Harness
  • 1) Cut off the White Harness
  • 2) Cut off the Red Wire, or ignore
  • 3) White Wires goes to your A/F wire signal
  • 4) Black Wire goes to your A/F Ground
 BUY IT @,

BUY IT @,

BUY IT @,

  • E-manage Ultimate Remote Switching System #15500351
  • Allows you to Start/Stop the 'Data Logging' on the Go from the steering wheel, that way you can log exactly what you want without reaching for the laptop
  • Manual

 

BUY IT @,

  • E-manage Ultimate USB Cable (Generic Brand, 6 ft)
  • This cable connects between your PC and the e-manage ultimate
  • This cable is included with your e-manage ultimate if you bought your main unit from us
 BUY IT @,

  • E-manage Ultimate Meter Cable (Generic Brand, 6 feet)
  • This cable connects between your e-manage ultimate and your greddy 60mm gauge with peak/warning, it will let you display the gauge readings digitally on the laptop, you will have the ability to log, set warning, see peak reading
 BUY IT @,
 E-manage Ultimate Special Adaptors:
 Special Thanks to VR4neophyte For the Translations.

  • GReddy e-manage Ultimate ignition signal adapter #1  - #15921500
  • For Straight 6, ER34, WGNC34, etc ... when the ignition harness is used.
  • English Japanese
     
BUY IT @,
  • GReddy e-manage Ultimate ignition signal adapter #2  - #15931500
  • For SUZUKI K6A, For MITSUBISHI CT9A (VIII～on), CT9A (A/T), DAIHATSU JB-DET, etc...
  • When the ignition harness is used.
  • English Japanese
     
BUY IT @,
  • GReddy e-manage Ultimate ignition signal adapter #3  - #15951500
  • For NSX (NA1).. .when the ignition harness is used.
  • English Japanese
     
BUY IT @,

  • GReddy e-manage Ultimate injector adapter #1 - #15901505
  • For 4 cylinders
  • For LANCER EVO (VIII) CT9A 2003.1- On
  • For IMPREZA GDB 2000.10 - On
  • For LEGACY BE5/BH5 1998.6 - On
  • When the e-manage ultimate is connected to increase or decrease fuel through the injector harness, a check engine light will turn on because the ECU recognizes the wires are cut.
  • English Japanese
     
BUY IT @,

  • GReddy e-manage Ultimate injector adapter #2 - #15901504
  • For 6 cylinders
  • When the e-manage ultimate is connected to increase or decrease fuel through the injector harness, the injectors will run too rich, use this harness to cure this problem.
  • English Japanese
     
BUY IT @,

  • GReddy e-manage Ultimate injector adapter #3 (4 cylinders) - #15901506
  • for 4 cylinders
  • For LANCER EVO (VII) CT9A 2002.12 - On
  • When the e-manage ultimate is connected to increase or decrease fuel through the injector harness, a check engine light will turn on because the ECU recognizes the wires are cut.
  • English Japanese
     
BUY IT @,

  • GReddy e-manage Ultimate injector adapter #3 (6 cylinders) - #15901507
  • For 6 cylinders
  • For Dodge Stealth / Mitsubishi 3000GT & Mitsubishi GTO 1990.9 - 2000.8
  • When the e-manage ultimate is connected to increase or decrease fuel through the injector harness, a check engine light will turn on because the ECU recognizes the wires are cut.
  • English Japanese
     
BUY IT @,

  • E-manage MSS Recognition Harness #15900911
  • This adapter is used in combination with GReddy Multi Switching System
  • It is mainly used to pull the ignition timing when NOS is used.
    English Japanese
     
BUY IT @,

  • E-manage Water Temperature Sensor Adapter #1  - #15900913
  • This adapter is used to improve cold start.
  • The water temperature signal line, a starter signal line, and a ground are wired.
    English Japanese
     
BUY IT @,

www.Autosportwiring.com Wiring Patch Harnesses

*These links will take you directly to Autosportwiring.com Shopping site.

e-manage
 E-manage Blue:



GReddy E-manage Blue!

- E-manage Blue,

 BUY IT @,

 

  
 
 E-manage Blue Programmers:

 GReddy "E-01" E-manage Programmer!
  - GReddy E-01, 		(Discontinued)

 GReddy Support Tool (Needs PC)

 - GReddy PC Cable + CD + Manual,

 BUY IT @,

 USB to Serial Adaptor

 - USB to Serial Adaptor,

  • This product is used in conjunction with the GReddy Support Tool cable to allow the GReddy cable to be converted from Serial to USB.
  • if your PC does not include a serial port, and you already have the GReddy support tool kit, then this is the part you need to allow the e-manage blue to connect to your PC.
  • Manual
  • Download Driver
 BUY IT @,
 
 Boost Controller & E-manage Blue Programmer in One

GReddy "PRofec E-01" Boost Controller & E-manage Blue Programmer!
 - Greddy PRofec E-01, (works with the E-manage Blue ONLY) 		(Discontinued)
PRofec E-01 & E-01 Replacement  Parts  Profec E-01 & E01 Hand Controller (Commander) Replacement, #99900070  

 PRofec E-01 Solenoid Replacement, #99900050 BUY IT @,
 PRofec E-01 Solenoid Harness Replacement, #99900051 BUY IT @,
 PRofec E-01 Pressure Sensor Replacement, #16401301 BUY IT @,
 PRofec E-01 Pressure Sensor Harness Replacement, #16401406 BUY IT @,
 PRofec E-01 & E-01 Power Harness Replacement, #99900057, BUY IT @,

    

   PRofec e-01 Software Update Service!
  • SD Card Update Service for PRofec E-01 & GReddy E-01,
  • A New SD card, 512MB, with the latest software available.
  • Latest PRofec E-01 Software is:
    --> Display: v1.15 / Center Unit v1.15 / e-manage v1.49   -      LATEST UPDATE!
 BUY IT @,
 

 
 E-manage Blue Optional Parts:

  • 18-pin, E-manage Main Harness - #15900914
    (This the harness that is included with the e-manage blue box, if you lost your or damaged it, then this is its replacement, 5 feet)
 BUY IT @,

  • Used with 18-pin, E-manage Injector Wires - #15900901 
    (use these wires to increase your injectors duty cycle, injector logging and to control sub-injectors, they fit into the empty spaces on the main harness, 5 feet)
 BUY IT @,

BUY IT @,

BUY IT @,

BUY IT @,

BUY IT @,

  • E-manage Air/Fuel input Harness "SUBSTITUTE" - #15900543
  • you will need to modify this harness to use it as an A/F Harness
  • 1) Cut off the White Harness
  • 2) Cut off the Red Wire, or ignore
  • 3) White Wires goes to your A/F wire signal
  • 4) Black Wire goes to your A/F Ground
 BUY IT @,
 
 E-manage Blue Special Adaptors:
  Special Thanks to Tony Chang & Don R. For the Translations.

  • GReddy e-manage Knock Sensor Adapter #1 - #15900903
  • Prevents retarded timing overcompensation by the ECU in response to the knock reading.
  • Wire to the knock sensor and ground.
  • Can be used with 6 cylinder and vehicles with two knock sensors, as well.
  • English Japanese
       
BUY IT @,

  • GReddy e-manage RPM Signal Extraction Adapter #1 - #15900904
  • For cars with no RPM signal (such as those utilizing the Nissan CAN communication system, this adapter will extract rpm information from the spark signals.
  • Wire into each of the ignition signals on the ECU side as well as the ground.
  • Can be used with cars possessing up to 6 cylinders.
  • English Japanese
     
BUY IT @,

  • GReddy e-manage RPM Signal Extraction Adapter #2 - #15900905
  • For extracting the RPM signal from one side of the ignition coil.
  • Can be used with engines utilizing simultaneous ignition (up to 6 cylinders), and individual ignitio