GREDDY PRofec E-01
> PRofec E-01 Manual <
From the Greddy Catalog
Box Front
Box Back
Box Sides
What's in the box? English manual, display & memory card, hand controller, main hub, valve unit, 3kg boost sensor, wires, tools, hoses, mounts &hardware.
This the Profec E-01 Main hub, 9 ports on it!
Different shots of the Profec E-01 display unit
On its mount
You can see here the PRofec E-01 SD memory card (SD=SECURE DIGITAL), its a 16MB card made by Hagiwara Sys-Com Co., Ltd .
These are the wires coming out of the display unit, the black harness goes to the hand controller, the white harness goes to the main hub.
Hand controller & its holder.
Valve controller & 3.0 kgcm2 boost sensor.
Wires, tools, hoses, mounts & hardware.
Optional: PRofec E-01 & E-01 External Signal Harness
Optional: PRofec E-01 Pressure Sensor Harness
Optional: PRofec E-01 & E-01 Remote Switching System
Optional: PRofec E-01 & E-01 Meter Harness
PRofec E-01 & E-01 USB Cable
PRofec E-01 & E-manage hook up map.
Some Screen Shots,
Here are some in vehicle Pictures
Profec E-01 installed on Mazda RX-8
This Holder can be found HERE
Profec E-01 & E-manage installed on Mazdaspeed Protege (2.0L turbo)
Profec E-01 installed on 2004 Mazda RX-8 GT
E-manage & Profec E-01 installed on a 99 GT Forester. EJ20
On a 1992 TT Stealth
On a WRX
On a MK3 Supra
On MohdParts.com 1994 TT Supra
In Al Stanek Supra,
And Another Supra
Install: Velcro does not stick to the dash. I Velcro'd the Profec E-01 to the back of the supplied metal bracket (flat side) and stuck the other side into the empty clock hole. I used 2 screws pointing out from the bracket to hold it in place (behind the dash). The top would still lean forward at this point so I Velcro'd the e-01 so that the top was kind of wedged under the lip for the odometer (I added some Velcro on top for added friction even though it doesn't really stick). It holds very well and does not move/rattle/fall at all.
On 1994 Toyota Camry V6 Custom Turbocharged
All the wires
from the display and commander pad were nicely hidden as you can see in the
pics. The supplied Profec E-01 display mounting bracket was trimmed, and there are
screws holding the bracket in the back side of the dash.
